Martin MiniMAC Maestro Manuel d'utilisateur télécharger pdf (Page 32)

32 Stand-Alone programming overview

Stand-Alone

programming

overview

Stand-alone is a mode where the fixture executes color changes at set

intervals and speeds, at pre-defined periods during the day, and/or when the

light level falls below a defined level. The term stand-alone is used to mean

that the Exterior 600 is not connected to a control device, but is pre-

programmed with a series of up to 20 scenes that play continuously in a

loop. The term ‘stand-alone operation’ can be applied to a single fixture, or

to multiple fixtures operating synchronously.

An Exterior 600 running a stand-alone show can perform synchronized

scene changes (triggered by a master fixture) with up to 31 other Martin

fixtures of the following types:

• Exterior 200

• Exterior 600

• FiberSource CMY150

• Imager series

• Alien 02 series

•MiniMAC Maestro

These fixtures all have their own shows individually programmed, but have

scenes synchronously triggered by a one fixture. Synchronous operation of

multiple fixtures requires that they be connected on a data link.

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 83 84

Pas de commentaire

Martin MiniMAC Maestro Manuel d'utilisateur Page 32