Martin Magnum 850 Spécifications télécharger pdf (Page 12)

How To Change A Pump:

1. DRAIN ALL FLUID FROM THE SYSTEM FIRST.

2. DISCONNECT FROM MAINS SUPPLY.

3. Remove TOP COVER.

4. Disconnect the POWER wires from the PUMP.

5. Disconnect the BLACK RUBBER FLUID LINE from the rear of the PUMP.

6. Move the fluid line out of the way. (BE CAREFUL OF FLUID COMING BACK DOWN THE

PIPE)

7. Disconnect the COPPER FLUID LINE from the front of the pump.

8. Unhook the rear RUBBER MOUNT from the pump.

9. Withdraw the pump from the front RUBBER MOUNT.

10. Remove the PUMP from the machine.

11. Remove the BRASS FITTING from the front of the PUMP.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 25 26

Pas de commentaire

Martin Magnum 850 Spécifications Page 12